Until now, if you wanted a killer graphic on your speaker cabs, you had to get them air-brushed or hand-painted costing $$$... not any more!
Sic•Skinz has designed a new way to display your band's graphics on your speaker cabs with no tools necessary, and they install in seconds. They will last you a lifetime, a tour, or a gig... your choice. They are super easy to switch out from one night to the next (in case you play in seventeen different bands, and want to represent them all), and are 100% non-invasive to your cabinets. AND... they are easy to remove so you can wash them because some jerk sloshed a full beer at you for breaking into "Rawhide" at a metal show.
These graphics are sublimation-printed on either a 4oz fabric, or an upgraded 8oz fabric which is more sturdy and flexes less for a better, long-term performance with crisper graphics due to the ink saturation of the denser weave. All of our AmpGraphics are hemmed with stitching (not tape!) and include 1" Pole Pockets (where applicable) on top and bottom to allow for the use of tension bars to stretch out your graphic on some cabinet models. Tension bars not sold through us, but are easily available through Amazon for just a few dollars!
ORDER DIRECT below or BROWSE our over 400 DRUM WRAP DESIGNS and choose the appropriately-sized AmpGraphic at checkout. Don't forget to tell us which stock design you want, we'll make it happen!
Note: If you don't see your cabinet size listed below, just reach out to us, we can do any size from 1x12s to massive PA cabs, side-fills, Scrims, and Backdrops; we just went with the most obvious sizes of these for online sales.
PRICING FOR AMPGRAPHICS
*Pricing below is for the AmpGraphic to fit the following models of cabinet or head. You are NOT purchasing a Cabinet or Amp Head here...
| Cabinet Style | Fabric: 4oz Display Poly (Basic) | Fabric: 8oz Oxford (Upgrade!) | |
|
FITS: Includes: Fabric, high resolution graphic with two 1 inch pole pockets to "hang" the graphic easily in front of your existing grill cloth using any 1/2 inch curtain rods available online.Aternate install would be to remove the front grill cloth altogether, and stapling your AmpGraphic in place of it. This is a complex procedure, thus we include pole pockets to avoid it. But, if you want a more permanent solution...Logo Plates can be put back on after AmpGraphic install for a more professional look.
|
$89.99 |
$119.99 |
|
FITS: Includes: Fabric, high resolution graphic with two 1 inch pole pockets to "hang" the graphic easily in front of your existing grill cloth using any 1/2 inch curtain rods available online.Aternate install would be to remove the front grill cloth altogether, and stapling your AmpGraphic in place of it. This is a complex procedure, thus we include pole pockets to avoid it. But, if you want a more permanent solution...Logo Plates can be put back on after AmpGraphic install for a more professional look. |
$69.99 |
$99.99 |
 |
FITS: Requires: Removing the top fascia panel, removal of old cloth, stretching the AmpGarphic across the face and securing it with staples.(Logo Plates can be put back on after AmpGraphic install for a more professional look) |
$69.99 |
$99.99 |
|
FITS: Requires: Removing the front grill entirel, stretching the AmpGarphic across the grill face and securing it, then replacing the grill onto the cabinet.(Logo Plate can be put back on after AmpGraphic install for a more professional look)
|
$89.99 |
$119.99 |
|
FITS: Requires: Removing the front grill by way of the four mounting screws, stretching the AmpGarphic across the grill face and securing it, then replacing the grill onto the cabinet, being careful to use washers under the screws to prevent twist of material, or ripping/tears.(Logo Plate can be put back on after AmpGraphic install for a more professional look) |
$69.99 |
$99.99 |
 |
FITS: Requires: Removing the front grill by way of the finger tabs, stretching the AmpGarphic across the grill face and securing it with staples or high bond tape, then replacing the grill onto the cabinet.(Logo Plates can be put back on after AmpGraphic install for a more professional look) |
$89.99 |
$119.99 |
|
FITS: Requires: Removing the front grill by way of the finger tabs, stretching the AmpGarphic across the grill face and securing it with staples or high bond tape, then replacing the grill onto the cabinet.(Logo Plates can be put back on after AmpGraphic install for a more professional look)
|
$89.99 |
$109.99 |
Volume Pricing for retailers available!
**You must upload your own graphics to us, or we can design your graphics for you at a fairer-than-agency rate. Contact us for a free quote. Shipping on any of these AmpGraphics is $19.99 ea. anywhere in the contiguous Lower 48 due to packaging. No shipping outside of North America unless extra arrangements are made in advance.
THESE AMPGRAPHICS ARE AVAILABLE BOTH WITH AND WITHOUT SUPPORT POLE POCKETS IN MOST CASES.
Just choose that option at checkout.
SPOILER ALERT: One more thing... Let's say you have FOUR Mesa Boogie 4x12s and a killer CD Cover from your new band... You can grab-up four Marshall 4x12 AmpGraphics and submit your CD Cover image to spread across those four cabinets to make one MASSIVE graphic for the stage, or lay the four cabs side by side, and make the entire row fire! The possibilities are limited only by your own imagination! Shoot, if you're like Kerry King or Yngwie Malmsteen, and have eight active 4x12s on stage at any given moment, you can even set up a live performance re-enactment of that old thumb game of sliding tiles! -- I offer THIS idea totally free of charge ;)
HERE ARE SOME CABINET ARRANGEMENT OPTIONS WITH AMPGRAPHICS YOU CAN TRY...
We Proudly Accept: 
Privacy Policy | Cookie Policy
© Sic•Skinz.com. All International Copyright Laws Apply. No images, content, nor publications shared from this site may be used without the strict permission of Sic•Skinz. Site design by Brien J Tomassetti.